日本KEL连接器XSLS00-30-A极细同轴电缆0.25mm间距连接器堆叠型

　　批发KEL中国价格查询进口连接器价格查询

　　authorized JAPAN KEL distributor China 科陆连接器代理

　　山东省青岛PCB连接器KEL代理商QQ: 1129700750

　　- XSLS系列的间距为0.25mm，

　　专为＃42 AWG，＃44 AWG和＃46 AWG微型同轴电缆而设计。 （堆叠类型）

　　XSLS系列的有效耦合长度仅为0.31mm，低剖面堆叠高度为1.44mm。

　　电缆组装后，XSLS系列也可以穿过狭窄的区域，例如小铰链孔。

　　超细间距0.25mm。

　　超薄型1.44mm。

　　适用于微型同轴电缆。 （＃42 AWG，＃44 AWG，＃46 AWG）

　　*可能适用于某些分立电缆，请咨询北京销售办事处。

　　高度可靠的设计，有效触点位移0.31mm。

　　电缆组装之后，可以通过诸如小铰链孔之类的狭窄区域。

　　由于连接器的底部覆盖有树脂，因此可以在连接器下方印刷电路。

　　电路板侧面接触的镍屏障可防止焊料上升。

　　连接器两端的接地端子改善了传输性能。

　　板侧连接器的接地端子也用作固定夹。

　　电缆侧连接器的触点之间模具肋提高了电缆对准的精度并防止焊桥。

　　信号端子由Pulse Heat一次焊接，保持稳定且高度可靠的连接。

　　电缆侧连接器的宽度比板侧连接器长，方便在不使用夹具的情况下容易插入和取出。

　　可以自动或手动安装。

　　符合RoHS标准。

　　触点材料：铜合金

　　触点电镀：镍金

　　固定夹材料：铜合金

　　保留夹板镀层：镀镍金

　　外壳材料： 不锈钢 ；外壳镀镍金

　　每个触点电流 0.3A

　　触点电阻： 100mΩ

　　介电耐压：90V AC，持续1分钟

　　绝缘电阻： 50MΩmin。 在100V DC

　　工作温度：-40°C至+ 85°C

　　插入和拔出耐久性 30 次

　　推荐的电缆＃42/44/46

　　微型同轴电缆（外径：0.235 mm（0.009''））

　　0.25mm Pitch Connector for Micro Coaxial Cable (Stacking Type)

　　- XSLS series have a pitch of 0.25mm, the smallest in the industry, and are designed for #42 AWG, #44 AWG and #46 AWG micro coaxial cables. (Stacking Type)

　　XSLS series with an effective coupled length of just 0.31mm, and a low-profile stacking height of 1.44mm.

　　XSLS series can be put through narrow areas such as small hinge holes even after cable assembly.

　　Ultra fine pitch 0.25mm.

　　Ultra low profile 1.44mm.

　　For micro coaxial cable. (#42 AWG, #44 AWG, #46 AWG)

　　*May be applied to some discrete cables, please consult with your local sales office.

　　Highly reliable design with effective contact displacement of 0.31mm.

　　It can be put through narrow areas such as small hinge holes even after cable assembly.

　　Due to that the bottom of the connector is covered with resin, circuit may be printed under the connector.

　　Nickel barrier of the board side contact prevents solder rise.

　　Ground terminals on both ends of the connector improve the transmission characteristic. Ground terminals of the board side connector are also utilized as retention clips.

　　Mold ribs between the contacts of the cable side connector improve the accuracy of the alignment of the cables and prevent solder bridge.

　　Signal terminals are soldered by Pulse Heat in one shot and keep a stable & highly reliable connection.

　　Having the width of the cable side connector longer than the board side connector makes it is easy to insert and withdraw without using a jig.

　　Can be automatic or manually placed.

　　RoHS compliance.

　　Insulator material

　　Glass-filled LCP (UL94V-0), Black (XSLS00: PCB side connector)

　　Inorganic Filler LCP (UL9V-0), Black

　　(XSLS20: Cable side connector)

　　Contact material

　　Copper alloy

　　Contact plating

　　Gold over Nickel

　　Shell material

　　Stainless

　　Shell plating

　　Gold over Nickel

　　Current rating

　　0.3A per contact

　　Contact resistance

　　100mΩ max.

　　Dielectric withstanding voltage

　　90V AC for 1 minute

　　Insulation resistance

　　50MΩ min. at 100V DC

　　Operating temperature

　　-40°C to +85°C

　　Insertion and withdrawal durability

　　30 times